Start with the complete set, not just the iron
The Tefal Pro Express Ultimate II GV9710 arrives as a steam generator and a dedicated ironing board (IB3004). Treat setup as two jobs: placing the generator where its steam can escape, and getting the board stable before you press a single shirt.
Because the supplied information does not include a step-by-step assembly manual, use the checkpoints below to prepare the set safely. If the board’s locking mechanism or the generator’s water-fill markings are unclear, check the printed instructions in the box before first use.
What the GV9710 set confirms
- Tefal Pro Express Ultimate II Steam Generator with Ironing Board GV9710 - 2800W, up to 7.6 bar pressure, 580g/min steam boost, No burn - safe for all fabrics, Made in France: 2800W power and up to 7.6 bar pressure for consistent, high-performance steam output. This is the performance baseline for your first ironing session; there is no need to guess at a warm-up routine beyond what the display or indicator tells you.
Tefal Pro Express Ultimate II Steam Generator with Ironing Board GV9710 - 2800W, up to 7.6 bar pressure, 580g/min steam boost, No burn - safe for all fabrics, Made in France - Tefal Pro Express Ultimate II Steam Generator with Ironing Board GV9710 - 2800W, up to 7.6 bar pressure, 580g/min steam boost, No burn - safe for all fabrics, Made in France: 580g/min steam boost to tackle stubborn creases quickly and effectively. The boost is the setting to reach for on thick cottons and linens, not for delicate fabrics.
- Tefal Pro Express Ultimate II Steam Generator with Ironing Board GV9710 - 2800W, up to 7.6 bar pressure, 580g/min steam boost, No burn - safe for all fabrics, Made in France: No burn technology makes it safe for all fabric types, preventing heat damage. This is the key safety feature that lets you work across mixed fabric loads without changing soleplate temperature for every item.
- Tefal Pro Express Ultimate II Steam Generator with Ironing Board GV9710 - 2800W, up to 7.6 bar pressure, 580g/min steam boost, No burn - safe for all fabrics, Made in France: Includes a matching ironing board (IB3004) for a convenient, all-in-one ironing solution. You do not need to source a separate board, but you do need to set it up correctly before use.
Set up the generator and board before first use
The supplied information does not list exact assembly steps, so these are practical checkpoints rather than manufacturer instructions. Confirm each one against the printed guide in the box.
- Place the steam generator on a stable, heat-resistant surface: Keep the unit level and leave space around it for steam to escape. Do not place it on a soft surface that could block ventilation.
- Unfold and lock the IB3004 ironing board: Check that the legs are fully open and any locking lever is engaged. The board should not wobble when you press down on it.
- Set the board height before filling the tank: Adjust the height to a comfortable standing position. Once the generator is filled and hot, moving the board becomes more awkward.
- Check the iron rest or parking area: The supplied information does not confirm a specific rest design, so use the rest provided with the set and never leave the hot soleplate face-down on the board.
- Inspect the steam hose and connections: Make sure the hose is not kinked or trapped under the board. A clear path for steam is part of safe first use.
Filling the water tank for the first time
The supplied information does not specify tank capacity, water type or a fill line, so do not guess at quantities. Fill only to the marking on the tank or generator, using the method shown in the printed instructions.
If the tank is removable, take it to the tap rather than pouring water over the hot unit. If it is fixed, use a jug and fill slowly to avoid spills near the electrical connection. Wipe any spillage before switching on.
For steam generator irons generally, many manufacturers specify tap water or a mix, but the GV9710 record supplied here does not confirm a water recommendation. Follow the label on the unit or the manual rather than assuming.
Choosing steam boost settings for different fabrics
The No burn feature is confirmed as safe for all fabric types, which means you can work through a mixed pile without changing the soleplate temperature for each garment. Steam boost is a separate decision: use it for heavy creases, not as a default.
- Heavy cottons, linen and denim: Use the 580g/min steam boost for stubborn creases. Press with the iron flat and let the steam penetrate before moving on.
- Everyday shirts and blouses: Start with normal steam and add boost only at collars, cuffs and button plackets where creases concentrate.
- Delicates and synthetics: No burn technology makes the soleplate safe for these fabrics, but keep steam boost off and use a light pass. Test on an inside seam first if the fabric is unfamiliar.
- Vertical steaming: The supplied information does not confirm a vertical steam function, so do not assume the GV9710 can be used off the board. Iron flat unless the manual says otherwise.
Your first ironing session: a simple order of work
Begin with a small item you are not worried about, such as a tea towel or pillowcase. That lets you confirm the steam is flowing, the board is stable and the iron glides without dragging.
Work from low-heat to high-heat items if you are unsure, even though No burn is confirmed for all fabrics. Sort the pile so delicates are finished before you switch to boost for linen, which avoids reheating decisions mid-basket.
Keep the steam hose behind the iron rather than looped over the board. When you set the iron down, use the rest and keep the soleplate away from the board surface.
What the supplied information does not confirm
The GV9710 record supplied here does not include a tank capacity, a descaling schedule, a water hardness recommendation, a vertical steam claim, or a specific ironing board assembly sequence. Do not invent these details or assume they match another Tefal model.
If you need those specifics before buying or before first use, check the product page manual or the printed guide in the box. The confirmed facts above are enough to set up the set safely and start ironing, but not enough to write a full maintenance schedule.
